Features 

1. The Autoclave is specially designed for the occasions in use of frequent sterilizations. It is equipped with the microprocessor for intelligent control and man-machine interface for convenient operation.  

2. With the distinctions in displaying parameter and condition actively, evaluating malfunction automatically, shutting off for self-protection automatically in case of excessive temperature and pressure, this type autoclave is reliable product in sterilizing. 

3. This product can be applied in sterilizing for the tooth device, operation device, Sanitary Material and other heat-resisting articles existing in the Dept. of Stomatology, Ophthalmology and lab. 

4. Preparation Before Operation    

   I. Before operation, please connect well to the power source.   

   II. Connect the power source hole under the back left side of the autoclave and the power socket by the attached power cable        inside the product’s package so as to switch on the autoclave.  

   III. Push down the main power button at the right bottom corner of the front side, when the indicator light is on, it means that the autoclave get through with the shown on the screen.    

   IV. The autoclave is not heated while under such initialization status. 

5. The product can be applied in sterilizing for the tooth device, operation device, Sanitary Material and other heat-resisting articles existing in the Dept. of Stomatology, Ophthalmology and lab. 

6. World standard Class-B type. 

Specifications
Rated Voltage: 220V±22V, 50Hz±1Hz, 110V±11V, 60Hz±1Hz
Rated Power: 1800W
Sterilizing (Pressure/temp.): 0.9-1.3bar/120oC, 2.0-2.3bar/120oC (Both of above are Under Standard Atmospheric pressure)
Fuse-Melting pipe: T15A / T30A
Capacity: 16Liters
Water Consumption volume per recycling round: 0.3L
Working programs: 4
Vacuum: three times pre-vacuum
Operating Temp: 0-40oC
Inside dimensions: 240mmX360mm
Outside dimensions(12L):445*550*395mm
package dimensions:670*550*500mm
Net Weight: 45kg
Gross weight: 47kg

Please Note 

1. The autoclave must be placed on the horizontal working base. 

2. Must use the distilled water for the purpose of lasting the working life. 

3. There shall be no clog to the air cooling window on the outer surface. 

4. The object apparatus to be sterilized shall be placed on the device plate with enough clearance retained in favor of the air circulation inside the sterilizing room. 

5. Empty the water inside the cooling water collecting tank frequently. Usually, the cooling water collecting tank shall be emptied once the water storing tank emptied. 

6. Must revolve the door handle to the terminal side while working. 

7. Don't open the door of autoclave when seeing the "0" displayed on the pressure indicator. 

8. Not be too closed to the door of the autoclave in case of scald when open the door. 

9. Shut off the power before discharging/installing the sealing ring, and the work shall be carried out after further sufficient cooling in case of scald. 

10. Don't drag or drop the autoclave during relocation period of the autoclave. 

11. The protecting ground shall be reliable. 

12. Equipment must be used away from the magnetic field.