DM-TRUST

egypt

Egypt.

D.M.H ACID ETCH :
<ul><li> 37% orthophosphoric acid gel </li><li> used before applying composite restoration.</li></ul>
Application:
Make normal isolation, clean the affected tooth and apply the gel to the desired area. Wait for 20 seconds, and then rinse with sufficient amount of water-air jet for at
least 15 seconds and finally dry with oil-free air jet for 15 seconds. White spots will be apparent in the enamel indicating good etch. If not repeat the
procedures.
It is known that deciduous teeth, hypermineralized teeth as in old age and teeth with higher fluoride content require longer application time.
Side effects:
Side effects are extremely rare including hypersensitivity.
Storage / shelf life:
Always close the syringe immediately after use. It is recommended to withdraw the plunger shortly after use and clean the nozzle of the syringe needle.
Store in cool dry place
For professional use only, store in dry condition, with tightly closed pack

D.M.H ACID ETCH 37% - 5ml

<div id="i71mhozi" class="bgis1" data-reactid=".0.$SITE_ROOT.$desktop_siteRoot.$PAGES_CONTAINER.1.1.$SITE_PAGES.$cl1o_DESKTOP.1.$i71mhozi">
<div id="i71mhoziinlineContent" class="bgis1inlineContent" style="text-align: left;" data-reactid=".0.$SITE_ROOT.$desktop_siteRoot.$PAGES_CONTAINER.1.1.$SITE_PAGES.$cl1o_DESKTOP.1.$i71mhozi.1"> </div>
</div>
<div id="i71mhozi_0" class="txtNew" data-reactid=".0.$SITE_ROOT.$desktop_siteRoot.$PAGES_CONTAINER.1.1.$SITE_PAGES.$cl1o_DESKTOP.1.$i71mhozi_0">
DM WHITE : in office BLEACHING GEL
HIGH efficiency, neutral ph, least sensitivity, dual activated, contains fluoride. The protective gel provide one step easy application and transmit light energy .
DM white is an innovative dual activated bleaching system .
Its recommended-especially for sensitive patients-to cover the applied bleach with a thin layer of the protective gel . this gel permit the curing light to pass through for better efficiency and prevent the burning effect of chemicals to hurt the soft tissues. 
</div>

D.M White

DMR Eug
reinforced zinc Oxide Eugenol cemnt
Powder/ Liquid
DMR Eug, is powder and liquid temporary tooth filling material. The powder contains aluminum oxide with polymers to increase its mechanical properties.

D.M.R

D.M. Liner 
calcium hydroxide powder
D.M powder is fine grade calcium hydroxide powder . This form is preferred by some clinicians who used it alone or after mixing with water saline or other medications .

D.M. Liner

D.M.Fix
DENTUTRE ADHESIVE POWDER D.M.Fix is a zinc free denture adhesive powder with long lasting formula. Indication: D.M.Fix is used to hold and secure dental appliances in their position. Useful in the jaw relation record step for stabilizing the trial denture base. In addition of holding dentures using D.M.Fix provide many advantages of dentures’ wearers for example; D.M.Fix is recommended for all patients with new dentures. It helps and accelerate the tolerance and adaptations to the new device. D.M.Fix prevent food trap between denture base and underlying mucosa. 
D.M.Fix increases masticatory efficiency by more than 30%. Application: Apply a thin layer of the powder on the whole (wet) fitting surface of the denture. Start with small amount and increase if necessary. Then wear the denture and hold in place for few seconds

D.M Fix powder

D.M.H ACID ETCH :<ul><li> 37% orthophosphoric acid gel </li><li> used before applying composite restoration.</li></ul>Application:Make normal isolation, clean the affected tooth and apply the gel to the desired area. Wait for 20 seconds, and then rinse with sufficient amount of water-air jet for atleast 15 seconds and finally dry with oil-free air jet for 15 seconds. White spots will be apparent in the enamel indicating good etch. If not repeat theprocedures.It is known that deciduous teeth, hypermineralized teeth as in old age and teeth with higher fluoride content require longer application time.Side effects:Side effects are extremely rare including hypersensitivity.Storage / shelf life:Always close the syringe immediately after use. It is recommended to withdraw the plunger shortly after use and clean the nozzle of the syringe needle.Store in cool dry placeFor professional use only, store in dry condition, with tightly closed pack

D.M.H ACID ETCH 37% - 3ml

PulpCalm Aldehyde Free
PulpCalm, is powder and liquid formulation containing a blend of zinc oxide, calcium oxides, silicon oxides, aluminum oxides, cupper oxides, cresols and eugenol. Used as subliner and/or temporary tooth filling paste. Indication: PulpCalm is an antiseptic, anti-inflammatory and pain reliever formulation. PulpCalm is recommended for pulpotomy for deciduous and selected cases of permanent teeth. 
Also it is recommended in 1st visit of endodontic treatment case of inflamed pulp to permit manipulation with no pain under regular anesthesia in the next visit, which is preferred to be 24 hours at least from the acute condition.

DM trust - PulpCalm Econ 30gm

D. M. Fix Denture Adhesive Cream. D.M.Fix is azinc free denture adhesive cream with long lasting formula. دي ام فيكس كريم لتثبيت اطقم الاسنان . دي ام فيكس هو كريم خالي من الزنك لتثبيت اطقم الاسنان بتركيبه توفر الثبات لفترات طويله. الاستخدامات: دي ام فيكس يستخدم لتثبيت اطقم الاسنان والاجهزه الشبيهه مثل اجهزه التقويم المتحركه واجهزه الفم الرياضي في اماكنها. دي ام فيكس :يوصي به للاشخاص حديثي العهد باستعمال اطقم الاسنان.فهو يساعد علي سرعه التعود والتكيف مع الاطقم او الاجهزه الجديده. دي ام فيكس :يمنع تخزين الطعام بين قاعده طقم الاسنان والانسجه الحامله للطقم . دي ام فيكس :يزيد كفاءه المضغ بنحو اكثر من % 30. طريقه الاستعمال: تدهن طبقه خفيفه علي السطح الداخلي لطقم الاسنان وتزداد الكميه حسب الحاجه. يفضل ان يوزع الكريم في المكان المقابل للاسنان الاماميه وعلي الجانبين مقابل الضروس الطاحنه ثم يلبس الطقم ويثبت في مكانه لعده ثواني .

D.M Fix Cream

For Painless Easy Caries removing
Cariemove is one of novel caries removing systems.i.e. Chemo mechanical Caries Removal (CMCR). It contains amino acids, sodium hypochlorite carboxyglycine and excepients. The use of minimal invasive dentistry and attention to patient comfort is of utmost importance especially for the school children and anxious and uncooperative patients. This demanded the newer patient friendly technique in dentistry amongst which is the Chemo mechanical caries removal (CMCR). CMCR involves the selective caries removal of carious dentine. As only the carious dentine is removed the painful removal of sound dentine is avoided and the anxiety due to the vibration of the handpiece is also reduced thus it appears to be more comfortable to the patient. CMCR although more prolonged procedure, is effective in caries removal.
Indication: 
Thus CMCR is an effective alternate method for caries removal; it is more conservative and more comfortable for the patients. - Atraumatic restorative technique - Filling in pedodontics especially for large cavities - Teeth to be restored with adhesive materials such as resin composite or glass ionomer (not recommended for amalgam restorations or inlays.
APPLICATION:  Make routine isolation of teeth o Apply suitable amount of the gel in the intended tooth (cavity) and wait for 30 seconds. o Start excavation using sharp excavator and remove soften caries. o Rinse thoroughly with air/water o Procedures could be repeated with shorter times (15 seconds) till removing all carious dentine. o It is recommended to use alkaline subase as calcium hydroxide ceramoseal or D.M Cal after using this techniques.
Side effects:
Side effects are extremely rare including hypersensitivity. Storage: Always close the syringe immediately after use. It is recommended to withdraw the plunger shortly after use and clean the nozzle of the syringe needle. 
For professional use only, store in dry condition, below 25 oC with tightly closed pack.

DM CarieMove 1.5 ml

Medica Care

Adper Single Bond 2 Adhesive is a
clinically proven total etch, dental bonding agent. This visible-light
activated product incorporates 5nm diameter silica filler which is of 10
percent by weight. It is specifically meant for direct light-cured restorative
material as well as for the treatment of cervical sensitivity. It can also be
used for bonding laboratory made composites and for bonding amalgam. The vial
delivery system of Adper Single Bond 2 Adhesive has a ‘pinch & flip’ cap
design that minimizes the difficulties associated with typical threaded caps.
The Adper Single Bond 2 vial was designed to shield photo initiator from the
visible light. The unique translucent vial allows visual inspection of the
contents. AdperSingle Bond 2 Adhesive comprises of the same components as the
Adper Single Bond adhesive except for the silica nanofiller. The photo
initiator system permits for a fast, 10 second light-cure. 
In contrast to other adhesives which
have larger filler particles incorporated, the extremely smaller particles of
Adper Single Bond 2 keep them in colloidal suspension and hence no shaking is
required before using.<o:p></o:p>
<o:p> </o:p>
Feature: <o:p></o:p>
<ul type="disc">
 <li class="MsoNormal">Excellent
 shear bond strength<o:p></o:p></li>
 <li class="MsoNormal">Special
 cap for minimum evaporation<o:p></o:p></li>
 <li class="MsoNormal">Maintains
 bond strength - Outstanding shelf life<o:p></o:p></li>
 <li class="MsoNormal">Stable
 nano-filler, will not settle<o:p></o:p></li>
</ul>
Indication:<o:p></o:p>
<ul type="disc">
 <li class="MsoNormal">Direct
 light-cured composite/ compomer restorations<o:p></o:p></li>
 <li class="MsoNormal">Porcelain/
 composite repair<o:p></o:p></li>
 <li class="MsoNormal">Porcelain
 veneers (when used with RelyX Veneer Cement)<o:p></o:p></li>
 <li class="MsoNormal">Crown
 & bridge, inlay/ onlay, bonding amalgam ( When used with RelyX ARC
 Adhesive Resin Cement)<o:p></o:p></li>
 <li class="MsoNormal">Root
 surface desensitization<o:p></o:p></li>
</ul>
Direction:
<o:p></o:p>
<ul type="disc">
 <li class="MsoNormal">To
 unlock, pinch the sides of the cap and flip the cap back to expose the
 dispensing tip.<o:p></o:p></li>
 <li class="MsoNormal">Squeeze
 out the required drops into the disposable mixing well.<o:p></o:p></li>
 <li class="MsoNormal">Flip
 the cap back once finished, to secure by its locking mechanism.<o:p></o:p></li>
</ul>
Steps
for Direct Light Cure restorations in Enamel and Dentin:<o:p></o:p>
<ul type="disc">
 <li class="MsoNormal">Isolation<o:p></o:p></li>
 <li class="MsoNormal">Cavity
 Preparation<o:p></o:p></li>
 <li class="MsoNormal">Etching:
 After applying an etchant to enamel and dentine, wait for some time and rinse.
 Blot excess water so that the surface should be moist without pooling of
 water.<o:p></o:p></li>
 <li class="MsoNormal">Adhesive:
 Apply 2-3 consecutive coats of adhesive to etched enamel and dentin for 15
 seconds gently using a fully saturated applicator, immediately after
 blotting<o:p></o:p></li>
 <li class="MsoNormal">Restorative
 placement, cure and finishing</li>
</ul>
 
Bonding
Mechanism:<o:p></o:p>
Dental bonding adhesives normally rely on a micromechanical
bond for enamel and dentin adhesion. Prior to adhesion, total etch adhesives
rapidly demineralize the mineral phase of enamel and dentin by an acidic agent.
A gelled phosphoric acid with approximately 35% concentration is generally used
on the enamel which increases the surface area available for bonding. This
process is termed as acid etching. The porosities formed by etching made it
possible for low viscosity, polymerizable resins to penetrate, thereby forming
an interlocking mechanical bonding. Studies shows that the incorporation of
nano filled particles in adhesives has marginally increased its detin bond
strength (0.04MPa)<o:p></o:p>
Few second etch of prepared dentin entirely dissolves the
smear layer and removes the mineral phase. A collagen phase which is resistant
to acid dissolution is present at the surface after washing off the etchant.
Penetration into this collagenous phase and its successive polymerization
offers an interlocking layer known as hybrid layer. The dentin bond strength of
Adper Single Bond when compared to other Adhesives is much higher<o:p></o:p>
<o:p> </o:p>
Other Info:<o:p></o:p>
<ul type="disc">
 <li class="MsoNormal">To
 minimize evaporation, Adper Single Bond 2 adhesive should be capped soon
 after using<o:p></o:p></li>
 <li class="MsoNormal">It
 can be stored at room temperature<o:p></o:p></li>
 <li class="MsoNormal">Do
 not store products in proximity to eugenol containing products<o:p></o:p></li>
 <li class="MsoNormal">Do
 not expose materials to elevated temperature or intense light.<o:p></o:p></li>
 <li class="MsoNormal">Shelf
 life of the vial delivery is 36 months at room temperature.<o:p></o:p></li>
</ul>

3M™ ESPE™ Adper™ Single Bond 2 total-etch adhesive with nanofiller produces
higher dentine bond strengths...Use for direct and
indirect restorations.

3M ESPE ADPER SINGLE BOND 2 ADHESIVE

<ul><li>Excellent shear bond strength</li><li>Special cap for minimum evaporation</li><li>Maintains bond strength - Outstanding shelf life</li><li>Stable nano-filler, will not settle</li></ul>

Details
<ul><li>Life-like aesthetics</li><li>Excellent polish and polish retention</li><li>Wide range of shades and opacities</li><li>Improved fluorescence</li><li>Simple to Use</li><li>Exceptional handling</li><li>More body shades for single-shade restorations</li><li>Capsules and syringes are color-coded by opacity</li></ul>
Filtek Z350Xt Universal Restorative is a high-performance, versatile nanocomposite. Excellent aesthetics for anterior restorations, strong enough for posterior restorations.
<h4>Suggested Applications</h4>
<ul><li>Direct anterior and posterior restorations (Classes I, II, III, IV and V)</li><li>Minimally Invasive Dentistry (MID)</li><li>Sandwich technique with glass ionomer resin material</li><li>Cusp build-up</li><li>Core build-up</li><li>Splinting</li><li>Indirect anterior and posterior restorations including inlays, onlays and veneers</li></ul>

3M Filtek Z350 XT Universal Restorative Syringe (4g)

Alexdent

Phosphoric Acid Dental Etchant

<o:p> </o:p>

<ul>
	<li>Effective elimination of the smear layer</li>
	<li>Providing strong bonding strength</li>
	<li>Leave no residues</li>
	<li>Containing 35/37% phosphoric acid</li>
	<li>Easy to application (Good handling, Control the Flow)</li>
	<li>Effective bulk system</li>
</ul>
<o:p></o:p>

phosphoric Acid Dental Etchan
Effective elimination of the smear layer
Providing strong bonding strength
Leave no residues
Containing 35/37% phosphoric acid
Easy to application (Good handling, Control the Flow)
Effective bulk system

Charm Acid-Etch 3 syring *5 ml

<ul>
	<li>Providing strong bonding strength</li>
	<li>Leave no residues</li>
</ul>