DM-TRUST

egypt

Egypt.

For Painless Easy Caries removing
Cariemove is one of novel caries removing systems.i.e. Chemo mechanical Caries Removal (CMCR). It contains amino acids, sodium hypochlorite carboxyglycine and excepients. The use of minimal invasive dentistry and attention to patient comfort is of utmost importance especially for the school children and anxious and uncooperative patients. This demanded the newer patient friendly technique in dentistry amongst which is the Chemo mechanical caries removal (CMCR). CMCR involves the selective caries removal of carious dentine. As only the carious dentine is removed the painful removal of sound dentine is avoided and the anxiety due to the vibration of the handpiece is also reduced thus it appears to be more comfortable to the patient. CMCR although more prolonged procedure, is effective in caries removal.
Indication: 
Thus CMCR is an effective alternate method for caries removal; it is more conservative and more comfortable for the patients. - Atraumatic restorative technique - Filling in pedodontics especially for large cavities - Teeth to be restored with adhesive materials such as resin composite or glass ionomer (not recommended for amalgam restorations or inlays.
APPLICATION:  Make routine isolation of teeth o Apply suitable amount of the gel in the intended tooth (cavity) and wait for 30 seconds. o Start excavation using sharp excavator and remove soften caries. o Rinse thoroughly with air/water o Procedures could be repeated with shorter times (15 seconds) till removing all carious dentine. o It is recommended to use alkaline subase as calcium hydroxide ceramoseal or D.M Cal after using this techniques.
Side effects:
Side effects are extremely rare including hypersensitivity. Storage: Always close the syringe immediately after use. It is recommended to withdraw the plunger shortly after use and clean the nozzle of the syringe needle. 
For professional use only, store in dry condition, below 25 oC with tightly closed pack.

DM CarieMove 1.5 ml

Medica Care

Adper Single Bond 2 Adhesive is a
clinically proven total etch, dental bonding agent. This visible-light
activated product incorporates 5nm diameter silica filler which is of 10
percent by weight. It is specifically meant for direct light-cured restorative
material as well as for the treatment of cervical sensitivity. It can also be
used for bonding laboratory made composites and for bonding amalgam. The vial
delivery system of Adper Single Bond 2 Adhesive has a ‘pinch & flip’ cap
design that minimizes the difficulties associated with typical threaded caps.
The Adper Single Bond 2 vial was designed to shield photo initiator from the
visible light. The unique translucent vial allows visual inspection of the
contents. AdperSingle Bond 2 Adhesive comprises of the same components as the
Adper Single Bond adhesive except for the silica nanofiller. The photo
initiator system permits for a fast, 10 second light-cure. 
In contrast to other adhesives which
have larger filler particles incorporated, the extremely smaller particles of
Adper Single Bond 2 keep them in colloidal suspension and hence no shaking is
required before using.<o:p></o:p>
<o:p> </o:p>
Feature: <o:p></o:p>
<ul type="disc">
 <li class="MsoNormal">Excellent
 shear bond strength<o:p></o:p></li>
 <li class="MsoNormal">Special
 cap for minimum evaporation<o:p></o:p></li>
 <li class="MsoNormal">Maintains
 bond strength - Outstanding shelf life<o:p></o:p></li>
 <li class="MsoNormal">Stable
 nano-filler, will not settle<o:p></o:p></li>
</ul>
Indication:<o:p></o:p>
<ul type="disc">
 <li class="MsoNormal">Direct
 light-cured composite/ compomer restorations<o:p></o:p></li>
 <li class="MsoNormal">Porcelain/
 composite repair<o:p></o:p></li>
 <li class="MsoNormal">Porcelain
 veneers (when used with RelyX Veneer Cement)<o:p></o:p></li>
 <li class="MsoNormal">Crown
 & bridge, inlay/ onlay, bonding amalgam ( When used with RelyX ARC
 Adhesive Resin Cement)<o:p></o:p></li>
 <li class="MsoNormal">Root
 surface desensitization<o:p></o:p></li>
</ul>
Direction:
<o:p></o:p>
<ul type="disc">
 <li class="MsoNormal">To
 unlock, pinch the sides of the cap and flip the cap back to expose the
 dispensing tip.<o:p></o:p></li>
 <li class="MsoNormal">Squeeze
 out the required drops into the disposable mixing well.<o:p></o:p></li>
 <li class="MsoNormal">Flip
 the cap back once finished, to secure by its locking mechanism.<o:p></o:p></li>
</ul>
Steps
for Direct Light Cure restorations in Enamel and Dentin:<o:p></o:p>
<ul type="disc">
 <li class="MsoNormal">Isolation<o:p></o:p></li>
 <li class="MsoNormal">Cavity
 Preparation<o:p></o:p></li>
 <li class="MsoNormal">Etching:
 After applying an etchant to enamel and dentine, wait for some time and rinse.
 Blot excess water so that the surface should be moist without pooling of
 water.<o:p></o:p></li>
 <li class="MsoNormal">Adhesive:
 Apply 2-3 consecutive coats of adhesive to etched enamel and dentin for 15
 seconds gently using a fully saturated applicator, immediately after
 blotting<o:p></o:p></li>
 <li class="MsoNormal">Restorative
 placement, cure and finishing</li>
</ul>
 
Bonding
Mechanism:<o:p></o:p>
Dental bonding adhesives normally rely on a micromechanical
bond for enamel and dentin adhesion. Prior to adhesion, total etch adhesives
rapidly demineralize the mineral phase of enamel and dentin by an acidic agent.
A gelled phosphoric acid with approximately 35% concentration is generally used
on the enamel which increases the surface area available for bonding. This
process is termed as acid etching. The porosities formed by etching made it
possible for low viscosity, polymerizable resins to penetrate, thereby forming
an interlocking mechanical bonding. Studies shows that the incorporation of
nano filled particles in adhesives has marginally increased its detin bond
strength (0.04MPa)<o:p></o:p>
Few second etch of prepared dentin entirely dissolves the
smear layer and removes the mineral phase. A collagen phase which is resistant
to acid dissolution is present at the surface after washing off the etchant.
Penetration into this collagenous phase and its successive polymerization
offers an interlocking layer known as hybrid layer. The dentin bond strength of
Adper Single Bond when compared to other Adhesives is much higher<o:p></o:p>
<o:p> </o:p>
Other Info:<o:p></o:p>
<ul type="disc">
 <li class="MsoNormal">To
 minimize evaporation, Adper Single Bond 2 adhesive should be capped soon
 after using<o:p></o:p></li>
 <li class="MsoNormal">It
 can be stored at room temperature<o:p></o:p></li>
 <li class="MsoNormal">Do
 not store products in proximity to eugenol containing products<o:p></o:p></li>
 <li class="MsoNormal">Do
 not expose materials to elevated temperature or intense light.<o:p></o:p></li>
 <li class="MsoNormal">Shelf
 life of the vial delivery is 36 months at room temperature.<o:p></o:p></li>
</ul>

3M™ ESPE™ Adper™ Single Bond 2 total-etch adhesive with nanofiller produces
higher dentine bond strengths...Use for direct and
indirect restorations.

3M ESPE ADPER SINGLE BOND 2 ADHESIVE

<ul><li>Excellent shear bond strength</li><li>Special cap for minimum evaporation</li><li>Maintains bond strength - Outstanding shelf life</li><li>Stable nano-filler, will not settle</li></ul>

Details
<ul><li>Life-like aesthetics</li><li>Excellent polish and polish retention</li><li>Wide range of shades and opacities</li><li>Improved fluorescence</li><li>Simple to Use</li><li>Exceptional handling</li><li>More body shades for single-shade restorations</li><li>Capsules and syringes are color-coded by opacity</li></ul>
Filtek Z350Xt Universal Restorative is a high-performance, versatile nanocomposite. Excellent aesthetics for anterior restorations, strong enough for posterior restorations.
<h4>Suggested Applications</h4>
<ul><li>Direct anterior and posterior restorations (Classes I, II, III, IV and V)</li><li>Minimally Invasive Dentistry (MID)</li><li>Sandwich technique with glass ionomer resin material</li><li>Cusp build-up</li><li>Core build-up</li><li>Splinting</li><li>Indirect anterior and posterior restorations including inlays, onlays and veneers</li></ul>

3M Filtek Z350 XT Universal Restorative Syringe (4g)

Alexdent

Phosphoric Acid Dental Etchant

<o:p> </o:p>

<ul>
	<li>Effective elimination of the smear layer</li>
	<li>Providing strong bonding strength</li>
	<li>Leave no residues</li>
	<li>Containing 35/37% phosphoric acid</li>
	<li>Easy to application (Good handling, Control the Flow)</li>
	<li>Effective bulk system</li>
</ul>
<o:p></o:p>

phosphoric Acid Dental Etchan
Effective elimination of the smear layer
Providing strong bonding strength
Leave no residues
Containing 35/37% phosphoric acid
Easy to application (Good handling, Control the Flow)
Effective bulk system

Charm Acid-Etch 3 syring *5 ml

<ul>
	<li>Providing strong bonding strength</li>
	<li>Leave no residues</li>
</ul>

Meta Biomed Nexcomp Flow

Misr for Trading and Distribution

Meta Biomed Meta Biner LC

Meta Biomed Meta Bond

Hermetically Seals the Cavity with excellent stability and strength. Buy it now from DentaCarts.

Meta Temp

Z-Prime Plus significantly enhances bond strengths to Zirconia, Alumina and Metal substrates more than any other surface primer on the market due to its unique combination of two active monomers, MDP, a phosphate monomer, and BPDM, a carboxylate monomer. This combination of primers gives Z-Prime Plus a synergistic effect resulting in its high bond strengths. 

Unique Benefits:

• Unparalleled bond strengths to Zirconia, Alumina and Metal restorations • Compatible with light-cured and dual-cured resin luting cements • Convenient, single bottle delivery offers ease of dispensing • Versatility and durability with many different substrates 

• Significantly enhances bond strengths of other resin cements*

Z-PRIME Plus is a single-component priming agent designed to enhance adhesion between indirect restorative materials and resin cements. It is used as a surface treatment for zirconia, alumina, metal/alloy, composite, endodontic posts, and intraoral repair

Bisco Z-prime

Z-Prime Plus significantly enhances bond strengths to Zirconia, Alumina and Metal substrates. 1/2 mm

Light Curing Composite Resin<o:p></o:p>
<o:p> </o:p>
<ul><li>The lowest polymerization shrinkage</li><li>Radiopaque</li><li>High compressive strength</li><li>Excellent shade matching with natural teeth</li></ul>
<o:p></o:p>

CharmFil Plus

<ul><li>The lowest polymerization shrinkage</li><li>Radiopaque</li><li>High compressive strength</li><li>Excellent shade matching with natural teeth</li></ul>

Light curing Temporary Filling Material
"Quicks®” is a light curing temporary filling
material. It is not sticky, high elasticity, high compressive strength. It has
some advantages such as easy application, tight formagin sealing, easy removal.<o:p></o:p>
<o:p> </o:p>
Blue, Yellow<o:p></o:p>
<ul><li>Time saving/economic system.</li><li>Easy to remove.</li><li>No stickness.</li><li>Easy to take out at once.</li><li>Light Curing Temporary Filling Material.</li><li>Blue and yellow color coded.</li></ul>

Light curing Temporary Filling Material
"Quicks®” is a light curing temporary filling material. It is not sticky, high elasticity, high compressive strength. It has some advantages such as easy application, tight formagin sealing, easy removal.

Quicks Light Curing Temporary Filling (3 syring)

Temporary Filling Material
<ul><li>3 Syringe </li><li>Useful for Inlay/ Onlay cases</li><li>Easy to remove at once</li><li>No stickness</li><li>Save Time/ Economic System</li></ul>
<o:p></o:p>

• small with ledge (№
1.0971) 10 pcs.<o:p></o:p>
• small (№ 1.0972) 20 pcs.<o:p></o:p>
• large (№ 1.0973) 20 pcs.<o:p></o:p>
• large with ledge (№
1.0974) 10 pcs.<o:p></o:p>
• medium with ledge (№
1.0975) 10 pcs.<o:p></o:p>
• medium (№ 1.0976) 30 pcs.<o:p></o:p>
• ring (standard) (№ 1.099) 1 pcs.<o:p></o:p>
• clamp Delta (№ 1.299) 1 pcs.<o:p></o:p>
There are 4 types of matrices: 
• 0,050 mm hard, 
• 0,035 mm hard, 
• 0,050 mm soft, 
• 0,035 mm soft.<o:p></o:p>
Specify, please, the necessary type, e.g.,
1.398 - hard 0,035 mm, 
otherwise you' ll receive matrices of the first type, i.e. hard 0,050 mm.<o:p></o:p>
WARNING!!! 
When operating with ring: 
1) make sure of integrity of the ring and
absence of rust on it; 
2) avoid high-speed opening; 
3) open the ring for width not more than 10 - 12
mm; 
4) open the ring for necessary width outside the
mouth before placing it on a tooth. 
 
 
<o:p></o:p>
CLEANING AND STERILIZATION INSTRUCTIONS:<o:p></o:p>
 
1) Submerge instruments in cleaning agent solution with neutral pH for 20
min; 
2) Rinse the instruments thoroughly with purified water for 3-5 min;<o:p></o:p>
3) Perform standard moist
heat / steam sterilization procedure following the sterilizer instructions. 
 
 
WARNING!!! 
1) Do not use cleaning agents with high
percentage of chlorine and cleaners containing oxalic acid; <o:p></o:p>
2) Do not keep instruments in liquid medium for
more than 3 hours

TOR-VM Sectional Matrix Kit 100 Pcs . no 1.398

<h5 style="font-stretch: normal; line-height: 18px; font-family: Arial, Helvetica, sans-serif; font-size: 14px; margin-bottom: 0px; color: rgb(92, 92, 92); background-color: rgb(255, 255, 255);">Set of Sectional Contoured Matrices</h5>
100 pcs.