professional-group-co

egypt

Egypt.

The PDTM&nbsp;MTA White is an aggregate of mineral trioxide whose opacifier, calcium tungstate, avoids the risks of stains and discolouration sometimes encountered with bismuth oxide. The optimised particle size distribution of its fine hydrophilic powder contributes to a quick and easy mixing. Its short setting time, around 15 minutes, makes it possible to carry out the restoration almost immediately. Humidity does not affect its mechanical characteristics in any way. Its low solubility creates a good seal, and its excellent marginal sealing ability prevents the migration of fluids into the root canal. The alkaline character of cement gives it antibacterial properties, and its hydrophilic character promotes the neoformation of cement by creating a favourable environment for the healing of periodontal tissues. It also stimulates the formation of a dentinal barrier directly in contact with the pulp.
The excellent biocompatibility of PDTM MTA White with the dentine wall and pulp allows its use for orthograde and retrograde root fillings, to treat cervical root resorptions as a pulp capping material, as well as for the apexification and pulpotomy of immature teeth in children and adolescents.
PD MTA White is a pure and biocompatible (Mineral Trioxide Aggregate) cement with an ultra-fine particle size and the following benefits: –&nbsp;
Bismuth oxide free to avoid stains and discoloration
Simple and quick mixing
Prevents bacterial migration
Excellent marginal sealing capacity
Stimulates dentin formation during pulp capping
Packaging specially designed for optimal and lossless use
Use distilled water for mixing Made in Switzerland

PD MTA White (3ml pure water & 4 x 140mg powder)

MICRO&nbsp;APICAL&nbsp;PLACING
The MAP System significantly improves the access to the cavity and other anatomically difficult regions to reach, thanks to the various geometries of needles. The precision of placement of the cylinder of compacted MTA loaded in the needle prevents the dispersion of the material in the root canal. The MAP System is the answer to your MTA placement challenges in most clinical indications.
The MAP System is an autoclavable and reusable surgical instrument. The single-use plastic plungers are also autoclavable, allowing a complete decontamination of the entire device.
<h2>A TOOL AT THE SERVICE OF&nbsp;PRECISION</h2>
The MAP System is made of different needles adapted to the procedure, the size of the canals and the volume of materials required. The needles are available in 3 differnet sizes and are colour-coded: yellow = No. 0, red = No. 1, blue = No. 2. The shape of the needles is specific for each clinical indication. Classic curved needles are designed for precise endodontic procedures performed using the orthograde approach. NiTi Memory Shape needles can be bent to your specific needs. Triple-angle Surgery needles and Hooked needles are intended for retrograde endodontic procedures.
<div class="video-container"><iframe width="500" height="281" src="//www.youtube.com/embed/GOmmI-dCoas" frameborder="0" allowfullscreen=""></iframe></div>
<div class="video-container"><iframe width="500" height="281" src="//www.youtube.com/embed/YiTr94sg2Ng" frameborder="0" allowfullscreen=""></iframe></div>
<div class="video-container"> </div>

PD MAP System (Needle )

Pro Crown is a self-curing resin for the production of temporary crowns, bridges, inlays, onlays and veneers. Pro Crown is based&nbsp; &nbsp;on multifunctional acryl composite, with a mixing ratio of base and catalyst paste of 10:1.&nbsp;
Pro Crown is gentle to the pulp because it has a very low polymerization temperature in the mouth. The temporary is ready for postprocessing after 5 min. The natural translucency and the colour stability allow for esthetic restorations, even without polishing. Pro Crown is available in 10 ml automix-syringes as well as in 50 ml automix-cartridges

Indication: Suitable for the production of temporary crowns, bridges of up to 4 units, inlays, onlays, veneers and for a temporary implant treatment. Physical data: Flexural strength (cross): 105 MPa Storage conditions: dry and protected from light, at 15 – 25 °C / 59 – 77 °F Self life: 2 years

WP Dental Pro Crown 50 ml cartridge

<h1>Re-Cord</h1>
Retraction cord, knitted with 100% cotton-wool. This non-impregnate retraction-cord with thousands of interconnecting tiny loops is building a tubular cord. It guarantees easy application and has got a high absorption capacity. The cord doesn’t frazzle and carries-out an optimate pressure on the sulcus.
<ul><li>100 % knitted cotton-wool</li><li>Non-impregnated</li><li>Even, permanent pressuce on the gum groove</li><li>Absorbs large quantities of blood</li></ul>

<ul><li>Very good retention in the sulcus</li><li>Elastic pressure on the sulcus opening</li><li>Very good hemostatic property</li><li>Does not frazzle</li></ul>

Temporary Retraction of marginal Gingiva and therefore presentation of the preparation-border.
Length:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;300 cm
Storage conditions: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;dry and protected from light 0 – 22 °C
Shelf life: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;1,5 years
Presentation:
WP4919:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Set with 4 different sizes: size: #00, #0, #1, #2, 4x 300 cm
WP4921:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Size: # 000, 1 x 300 cm
WP4915:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Size: # 00, 1 x 300 cm
WP4916:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Size: # 0, 1 x 300 cm
WP4917:&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;Size: # 1, 1 x 300 cm
WP4918:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Size: # 2, 1 x 300 cm

WP Dental Retraction Cord

C-Bond is a bonding for the total-etch-technique with an excellent adhesion to dentin and enamel.&nbsp;&nbsp; C-Bond ensures a safe adhesion between the tooth and composites. The material shows a good flowable consistency and is easy to use. C-Bond also adheres on glass-ionomer linings.
 
Adhesive between composites on one hand and enamel, dentin, lining materials like glass ionomer cements on the other hand. C-Bond may not be applied in proximity to the pulp.
 
Step 1: Put 1 – 2 drops of C-Bond on a mixing pad
Step 2: Use a a brush or sponge pellets to apply a thin layer in the prepared and etched cavity
Step 3: Remove surplus with a dry brush or sponge pellet
Step 4: Cure with halogen light for 15 sec.
 
Properties:
•Very easy to use
•Provides safe adhesion of composite to enamel, dentin and lining materials.
•Good longterm results
• Hydrophilic
Advantages:
•Safe adhesion
•Reduced secondary caries
 
Physical data:&nbsp;Viscosity: 3,0 – 8,0 dyn. dPa·s
Storage conditions:&nbsp;dry and protected from light, at 0 – 22 °C
Shelf life:&nbsp;3 years
Präsentation:
WP4300: 1 x 5 ml bottle
WP4230: 1 x 10 ml bottle

WP Dental C-Bond

Competence Flow is a flowable, light-curing composite for direct restorations of the cavity classes III, IV and V as well as repairs of bis-acrylate materials. Competence Flow is thixotropic, which makes it ageeable to handle. The composite does not run away from the place of application but is fluid when manipulated. Competence Flow is also nicely polishable and delivers esthetic restorations. The shrinkage is 1,7 %, which reduces secondary caries. The material is radiopaque.
Fillings of cavity-classes V, small fillings of cavity-classes I and II, fillings at anteriors of the cavity-classes III and IV, fillings of minimal-cavities, extended fissure-sealing at molar and premolar tooth, adhesive fixation of ceramic and composite-restaurations
 
Thixotropic
• Easy to handle
• High-gloss polishable
• Colour stabile
• Radiopaque
• Very low shrinkage of only 1,7 &gt;

WP Dental Competence Flow

Extra Gel is a thixotropic gel for precise etching of enamel. 
It contains 37% orthophosphoric acid. For better control of the etched areas Extra-Gel is blue coloured. Distinctive thixotropic reaction.
<ul><li>Safe and precise dosage possible</li><li>Point-precise application</li><li>No uncontrolled flowing</li></ul>
Density: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;1,3 – 1,4 g/ml&nbsp;&nbsp;&nbsp;&nbsp;
Storage conditions: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;dry and protected from light at 0 – 22 °C
Shelf life:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;3 years

WP Dental Extra Gel

MICRO&nbsp;APICAL&nbsp;PLACING
The MAP System significantly improves the access to the cavity and other anatomically difficult regions to reach, thanks to the various geometries of needles. The precision of placement of the cylinder of compacted MTA loaded in the needle prevents the dispersion of the material in the root canal. The MAP System is the answer to your MTA placement challenges in most clinical indications.
The MAP System is an autoclavable and reusable surgical instrument. The single-use plastic plungers are also autoclavable, allowing a complete decontamination of the entire device.
<h2>A TOOL AT THE SERVICE OF&nbsp;PRECISION</h2>
The MAP System is made of different needles adapted to the procedure, the size of the canals and the volume of materials required. The needles are available in 3 differnet sizes and are colour-coded: yellow = No. 0, red = No. 1, blue = No. 2. The shape of the needles is specific for each clinical indication. Classic curved needles are designed for precise endodontic procedures performed using the orthograde approach. NiTi Memory Shape needles can be bent to your specific needs. Triple-angle Surgery needles and Hooked needles are intended for retrograde endodontic procedures.
 

0.90 MM , N.0 , Yellow (Incl . 8 Plastic plungers + 1 cleaning curette )&nbsp;

"MAP" "NITI MEMORY SHAPE" NEEDLE

"MAP" "NITI MEMORY SHAPE" NEEDLE 1.30 MM

"MAP" "SURGERY" NEEDLE

<ul><li>PD EDTA 17% eases instrumentation and smear layer removal in chemo-mechanical root canal preparation. It is used for root canal irrigation, removal of debris and rinsing.</li><li>Ethylenediamide tetraacetic acid (EDTA) is a chelating agent which combines with the calcium ion and inactivates it, thereby exerting its decalcifying effect on dentine.</li><li>EDTA is active on the inorganic part of the smear layer and must be used alternatively with Sodium Hypochlorite solution to complete its dissolution.</li></ul>

PD EDTA 17% solution for root canal irrigation (15ml)

When endodontic retreatment is required, Eugenate desobturator is a pure orange oil solvent used for the softening and subsequent mechanical removal of eugenol-based cements (eugenate) or gutta-percha points. The softening of the obturating materials enables its easier mechanical removal, especially when the hardness and location of the material are critical.
As only few drops of solvent are necessary, precise delivery can be achieved using drop-by-dop dosing product, such as PD Plastic Pipettes 0.3ml or 1ml. Read the scientific articles about PD Eugenate Desobturator in News section to discover the safe and efficient use of the product on zinc oxide eugenol, calcium hydroxide and resin based obturation materials.
<div class="video-container"><iframe width="500" height="281" src="//www.youtube.com/embed/V7-k_GMX4EI" frameborder="0" allowfullscreen=""></iframe></div>